Scaffold Fittings

Double Coupler (Forged Type)

Double couplers will be used to connect two scaffold tubes at right angles and its standard dimensions are; For Tube o.d. 1) 48.30 X 48.30 mm 2) 48.30 X 60.00

Double Coupler (Pressed Type)

Double couplers will be used to connect two scaffold tubes at right angles and its standard dimensions are; For Tube o.d. 1) 48.30 X 48.30 mm 2) 48.30 X 60.00 mm3)48.30X76.10mm

Swivel Coupler (Forged Type)

Swivel couplers will be used to connect two scaffold tubes at any angles and its standard dimensions are; For Tube o.d. 1) 48.30 X 48.30 mm 2) 48.30 X 60.00 mm 3) 48.30 X 76.10mm

Swivel Coupler (Pressed Type)

Swivel couplers will be used to connect two scaffold tubes at any angles and its standard dimensions are; ForTubeo.d. 1) 48.30 X 48.30 mm 2) 48.30 X 60.00 mm 3)48.30X76.10 mm

OYSTER COUPLER

Putlog Coupler -OYSTER. used for the connection of putlogs and transoms to ledger

Putlog Coupler (Forged Type)

Putlog couplers will be used to connect transoms to ledger allowing scaffold board to be laid across on top of the putlogs or transoms and its standard dimensions are; For Tube o.d. 1) 48.30X48.30mm

Board Retaining Coupler (Forged Type)

BRC will be used to connect two scaffold boards inline or parallel to each other with scaffold tubes and its standard dimensions are; ForTubeo.d. 1)48.30 +Scaffold Boards

Girder Coupler (Forged Type)

Girder couplers will be used to connect beam or girder flange in one direction. A pair of girder couplers must always be used for safety and its standard dimensions are; ForTubeo.d. 1) 48.30 + Beam or Flange

Swivel Girder Coupler (Forged Type)

Girder couplers will be used to connect beam or girderflange in any direction. A pair of girder couplers must always be used for safety and its standard dimensions are; For Tube o.d.1) 48.30 + Beam or Flange

Sleeve Coupler (Pressed Type

Sleeve couplers will be used to connect two scaffold tubes in line externally and its standard dimensions are; ForTubeo.d. 1) 48.30X48.30

Joint Pin (Pressed Type)

Joint Pins will be used to connect two scaffold tubes in line internally and its standard dimensions are; ForTubeo.d. 1) 48.30X48.30

Fence Coupler (Pressed Type)

Fence Couplers will be used to connect two parallel fencing tubes and its standard dimensions are (For Tube o.d. 1) 48.30X48.30

ad

sasd